fashionandfineartdesign.com




Main / Card / Mpls-te-mib

Mpls-te-mib

Mpls-te-mib

Name: Mpls-te-mib

File size: 933mb

Language: English

Rating: 4/10

Download

 

draft-ietf-mpls-te-mibtxt Status of this Memo This document is an Internet-Draft and is in full conformance with all provisions of Section 10 of RFC 23 Apr The MPLS TE MIB is based on the IETF draft MIB entitled draft-ietf-mpls-te-mib .txt, which includes objects describing features that support. SNMP agent code operating in conjunction with the MPLS TE MIB enables a standardized, The MPLS TE MIB is based on the IETF draft MIB entitled.

Standards / RFCs:MPLS-TE-MIB: Download, View or Compile. Courtesy of ByteSphere's searchable online SNMP MIB database. This MIB module contains managed object definitions for MPLS Traffic Engineering (TE) as defined in: Extensions to RSVP for LSP Tunnels, Awduche et al. MPLS TE MIB As mentioned in the introductory section, the TE MIB is defined in draft-ietf-mpls-te-mib. Appendix B provides links to the Cisco online.

24 Apr RC-MPLS-TE-MIB. Function Overview. Relationships Between Tables. Description of Single Objects. Description. Two topics are covered here: • MPLS LSR Management Information Base (MIB) • MPLS TE MIB The LSR MTB is based on the IETF draft-ietf-mpls-lsr-mib, and. OID repository - = {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) mplsTeMIB(95)}. NetDiscover SNMP MIB/OID/TRAP/NOTIFICATION Database Index (no Parent Directory MIB File: fashionandfineartdesign.com MIB Module: MPLS-TE-MIB [OID]. When the message returns to the originating LSR, the CR-LDP signaled tunnel is ready to carry MPLS traffic. MPLS-TE MIB Overview Let us now focus on the.

Deploying MPLS Traffic Engineering. Rodrigo If you have #1, you probably don 't need MPLS-TE—yet. If you have #3, Tunnels are interfaces—use IF-MIB!. MPLS-TC-STD-MIB MPLS-TE-STD-MIB MPLS-LSR-STD-MIB FIGURE The relationship between the MPLS TE MIB modules. The MPLS LSR MIB module. MPLS-TE-MIB DEFINITIONS::= BEGIN MIB Start 1 2 IMPORTS MODULE- IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32, Counter A third MIB module, the MPLS traffic engineering MIB module (MPLS-TESTD-MIB ), is used to model and control MPLS TE LSPs. The primary purpose of the.

Throughout this document hyphenated MIB names (such as MPLS-TE-STD- MIB) should be taken to refer to specific MIB modules. Non- hyphenated MIB names. iso(1). org(3). dod(6). internet(1). experimental(3). mplsTeMIB(95). mplsTeScalars(1). mplsTunnelConfigured, SCALAR, read-only, Gauge, Prerequisites; How MPLS-TE Works; Basic Configuration; Knobs! Knobs MPLS -TE introduces a 3rd kind: Extends the MPLS-TE-MIB and MPLS-LSR-MIBs. As mentioned in the introductory section, the TE MIB is defined in draft-ietf-mpls- te-mib. Appendix B provides links to the Cisco online documentation for the.

More: